. OPERATION OPERATION ADJUSTING POSTURE OF WORK EQUIPMENT ADJUST ANGLE OF BLADE EDGE WARNING in a 3 - 108 It is dangerous if the work equipmen t moves b y mistake whe n adjusting angle of the blade edge. Set the wo stable condition, the n stop the engin e and lock the work equip ment securely with the work equipment lock le Blade cutting edge angle (A) can be adjusted t o meet s oil conditions. POWER TILTDOZE R h screw-adjustable tilt brace. h bar handle (1) to extend a distance between Power tiltdozer wit h screw-adjus table tilt b race Tur n t he brace wit h bar handle ( 1) to extend a distanc the joints (B), and then blade cutt ing edge angl e (A) incr eases.
To decrease the angl e, shorten the distance. Standard blade cu tting edge ang le (A) is 5 Standard distance between the j oints (B) i s as shown b D65EX: 1 150 mm (45.31 in) (45.15 in) (45.31 in) D65PX: 1 146 mm D65WX: 1150 mm REMARK When the machine is installed wi th a fixed typ e tilt brac e, a blade cutting ed ge angle cannot be ad Standard blade cu tting edge ang le (A) is 5 5°. When the blade cu tting edge is h eld at th e standard an gle, the tilt amount is D65EX: 4 60 mm ( D65PX: 4 50 mm ( D65WX: 410 mm ( ANGLE DOZER The angl e of the b lade edge of th e angle doze r cannot be adjusted. Standard blade cu tting edge ang le (A) is 5 5°.
Standard distance between the j oints (B) i s as shown in the table Model S tandard Use Range 1 D65EX ( 127mm 1 44.4in) ( 117-1137mm 44.0-44.8in) 1 D65PX ( 096mm 1 43.2in) ( 086-1106mm 42.8-43.6in)