Komatsu — LOADING, UNLOADING WORK

. OPERATION TRANSPORTATION UNLOADING WORK referring to the section, "STARTING IN COLD 3 - 122 1. Load and unload on fir m level ground only. Maintain a safe distance from the e dge of a roa 2. Apply the trailer brakes securely and put blocks (1) under the tires to hold the trailer i n position.Set gap (3) betwe en ramps (2) to match the distanc e between the left and right tr acks, and keep angle (4) to a max If ramps (2) bend appre ciably under the weight of the machine, put wooden block (5) u nder the ramps to support th 3. Remove the chains and wire ropes fastening the m achine. 4. Start the engine. In a cold weather, car In WEATHER (PAGE 3-9 5.

Set main work equipme nt lock lever to FREE positio n (F), and raise the work equipme (When transporting with 6. Set parking brake lever to the FREE position (F). 7. Set the transmission in idle. the 1st gear and run the engine at low 8. Set the travel direction toward the ramps and drive slowly. 9. The center of gravity o f the machine shifts sudde nly at the border between the ra unbalanced and becom border slowly. Drive down the ramps mps and trailer, and the m achine is es dangerous. Accordingly, pass the slowly and carefully until the machine ctly. the 10. leaves the ramps perfe