. OPERATION TROUBLESHOOTING METHOD OF TOWING MACHINE WARNING if a disabled machine is towed the brake. If blocks are not use, NOTICE The maximum towing capacity for this machine is 140,000 N (14,275 kg). Always carry out towing operations within the maximum towing capacity. part indicated with the arrow in the 3 - 130 Serious injury or death could re incorrectly or if there is a mistake in rope. If the engine does not start, put machine from moving, then rel there is danger that the machine Always check that the wire rope the weight of the machine being Never use a wire rope which has or kinks (C). There is danger tha operation.
Always wear leather gloves whe Never tow a machine on a slope During the towing operation, ne and the machine being towed. Operate the machine slowly and to the wire rope. For details of the method of tow ing, please contact your Komatsu d If the engine stops or the oil p ressure in the brake circuit lowers b ecause of a trouble in the hydraulic system, the brake works and the machine cannot move. To move the machine in this case, the oil press ure in the brake circuit must be heightened to the s pecified level with a special device. A sk your Komatsu distrib utor. rry out inspection and Moving a machine by towing is only used to move it to a place w here it is possible to ca maintenance.
It is not intend ed for moving the machine long distances. Do not use this method for towing the machine for long distances. If it is impossible to operate the steering and brakes of the mach ine being towed, do not let anyone ride on the machine. Keep the angle of the towing l ine to the minimum. Operate the machine so that the angle do es not become greater than 30° from the straight lin e. If t he machine gets stuck in the towed, install a towing wire rop Connect a wire rope to the p diagram at right.