. OPERATION TROUBLESHOOTING 3 - 137 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these items. In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy Oil pressure in torque converter fails to rise Improper tightening of oil pipe, pipe joint, air leaking in or oil leaking out because of damage Wear, scuffing of gear pump Insufficient oil in power train case Clogged oil filter element strainer in power train case Check, repair ( Check, replace) Add oil to the specified level. For details, see CHECK BEFORE STARTING Clean.
For details, see EVERY 500 HOURS SERVICE Torque converter is overheats Clogged radiator Engine coolant temperature is high Clogged oil cooler Oil pressure too low Lack of flow of lubricant caused by wear of power train gear pump Clean radiator core See ENGINE related parts ( Clean or repalce) Go to "Oil pressure in torque converter fails to rise" ( Replace gear pump) Torque converter oil temperature gauge does not work Defective oil temperature gauge Defective contact in wiring connection ( Replace oil temperature gauge) ( Check, repair) Lacks drawbar pull (machine does not pick up speed) Lack of engine horsepower Oil pressure in torque converter is too low See ENGINE related parts Go to " Oil pressure in torque converter fails to rise" Machine will not move when joystick is placed in FORWARD Insufficient oil in power train case Transmission oil pressure does not rise Defective Brake Defective lever wiring Parking brake lever is in LOCK position Add oil to specified level.
For details, see CHECK BEFORE STARTING Go to oil pressure in torque converter fails to rise ( Adjust linkage) ( Check, repair) Set to FREE position Does not steer even when steering is operated Defective lever wiring Abnormal HSS pump Abnormal HSS motor ( Check, repair) ( Check, replace) ( Check, replace) Machine doesn't stop when brake pedal are depressed Defective brake adjustment ( Adjust linkage) ( Check brake pressure)