Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK LEVEL OF BATTERY ELECTROLYTE Carry out this procedure before operating the machine. WARNING the 3. If the electrolyte level is below the midway point between the U.L and L.L lines, remove cap (1) and add distilled water to the U.L line. 4. After adding distilled water, tighten cap (1) securely. REMARK If distilled water is added to above the U.L. line, use a syringe to lower the level to the U.L. line. Neutralize the removed fluid with baking soda (sodium bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery maker.

4 - 55 Do not use the battery if the bat tery electrolyte level is below the LOWER LEVEL line. This will ac celerate deterioration inside of the battery and reduce the service life of the battery. In addition , it may cause an explo sion. s near the battery. The battery generates flammabl e gas and there is danger of explosion, d o not bring fire or spark Battery electrolyte is dangerous . If it gets in your eyes or on your skin, w ash it off with a large am ount of water and con doctor. When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LEVEL line. ay leak and cause damage to the paint surface or corrode other parts.

electrolyte level is too high, it m ay leak and cause damage to the paint s urface or corrode other NOTICE If there is a fear that the battery wate r may freeze after refilling with purified wa ter (e.g. commercially a vailable replenishment for a battery), do the replenishmen t before the day's work on the next day. Inspect the battery electrolyte l evel at least once a month and follo w the basic safety pro cedures given belo WHEN CHECKING ELECTROLYTE LEVEL FROM SIDE OF BATTERY tery, check as follows. If it is possible to check the ele ctrolyte level from the side of the bat tery, check as follows