. MAINTENANCE SERVICE PROCEDURE 4 - 80 CHECK VIBRATION DAMPER For th e check and red. replacement o tools a re requi Contact Komatsu Ltd . or its distr ibutor in the territor y for the replacement. It ha s to be replaced wit h a new one in the f ollowing cases.
Mating mark ( 1) is the inertia member of the vibration damper to show any m isalignment betwe en the tw If this misalignment exceeds any dent fo und on t he dampe r metal s urface deeper than 3.2 mm (0.1 in), the n (2) the vibration damper must b CHECK ALTERNATOR Conta ct your K omatsu distributor to have the alternat If the e ngine is started frequently, have t his inspectio n carried out every CHECK ENGINE VALVE CLEARANCE, ADJUS Specia l tools a re needed for inspection a nd maintena nce, please contact your Komatsu distri