. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS operation changes as follows. (G) (H) (J) (K) Rear pitch Front pitch Pitch gauge Standard pitch 3 - 43 Pitch contr ol the lever to the neutral position without fail, tilt After moving the leve osition fail, tilt the blade while pr essing any o f the s witches (M) in t he center of the knob. Then th e angle of th e blade edge changes (B) Hold : The blade s tops and holds a stationary posture. (G) Rear pitch : Blade edge angle small (H) Fron t pitch : Blade edge angle large Precaution s when using pitch c ontro When u the pitc operation til Pitch condition Tilt operation D65EX D65PX D65WX Amount of tilt Max.
forward pitch Only left tilt operation is possible Max. 870 mm (34.3 in) Max. 890 mm (35. 1 in) Max. 820 mm (32.3 in) Forward pitch (H) Both left and right tilt operations are possible Compared with standard: LEFT tilt is LARGER RIGHT tilt is SMALLER Standard pitch (K) 460 mm (18.1 in) (both left and right) 450 mm (17.7 i (both left and rig n) 410 mm (16.2 in) ht) (both left and right) Rear pitch (G) Compared with standard: LEFT tilt is SMALLER RIGHT tilt is LARGER Max. rear pitch Only right tilt operation is possible Max. 870 mm (34.3 in) Max. 890 mm (35. 1 in) Max. 820 mm (32.3 in)