N40469 Chapter 8 General data Engine Number of cylinders.........................................................................................................................................6 Cylinder arrangement...............................................................................................................................In line Cycle...............................................................................................................................................
Four stroke Induction system:.....................................................................................................Turbocharged aftercooling Combustion system....................................................................................................................Direct injection Nominal bore.......................................................................................................................... 105 mm (4.13 in) Stroke.....................................................................................................................................
127 mm (5.00 in) Compression ratio:.................................................................................................................................. 16.2:1 Cubic capacity........................................................................................................................6.6 litres (365 in 3 ) Firing order.................................................................................................................................. 1, 5, 3, 6, 4, 2 Valve tip clearances (hot or cold): - Inlet.................................................................................................................................
0.35 mm (0.0138 in) - Exhaust........................................................................................................................... 0.35 mm (0.0138 in) Lubricating oil pressure (minimum at maximum engine speed and normal engine temperature)............................................................................................................................... 3.6 bar Capacity of lubricating oil sump:
- Maximum....................................................................................................................15.0 litres (3.3 gallons) Coolant capacity (closed circuit)....................................................26.3 litres (46.26 UK pints) 27.7 US quarts Direction of rotation.....................................................................................................Clockwise from the front Batteries.....................................Two 12 volt 510 amperes (BS3911) or two 12 volt 790 amperes (SAE J537) Weight of the engine with coolant and engine lubricating oil, M300C, M250C.......................738 kg (1627lbs) Weight of the engine with coolant and engine lubricating oil, M216C, M190C.......................736 kg (1623lbs) Page 51