ELECTRICAL Replacing Parts Removed for Access Follow the procedure below to reinstall batteries on the vehicle: 1. Replace battery cover. Fairings not installed properly could come loose and cause other mo- torists to have an injury accident. It is important that fairings be installed properly. Failure to comply may re- sult in death, personal injury, equip- ment or property damage. WARNING! 1. Place batteries in vehicle and tighten bolt of holding plate. 2. Install 2 bolts in step strut. Torque to 24-32 lb-ft (33-43 Nm). 2. Reconnect positive cable. 3. Reconnect ground (negative) ground cable. 3. Install fairing and install 4 bolts. Torque to 6-7 lb-ft (8-9 Nm). 4.
Install steps by installing 2 bolts in each step. Torque to 24-32 lb-ft (33-43 Nm). WARNING! WARNING! Battery replacement may alter or disturb battery cable routing. Check to insure battery cables are free from any point of chaffing. Failure to comply may result in death, per- sonal injury, equipment or property damage. Before attempting any work on the batteries or electrical system, re- move all jewelry. If metal jewelry or other metal comes in contact with electrical circuits, a short circuit may occur causing you to be injured, as well as electrical system failure and damage. Always reinstall the steps before en- tering the cab.
Without the steps you could slip and fall, resulting in possi- ble injury to yourself. WARNING! 5 5-96 Y53-6077-1B1 (03/17)