TIRES AND WHEEL Replacing Tires WARNING! Greenhouse Gas Certified Tires Front: Replace front tires when less than 4/32 in. of tread remains. Check at three places equally spaced around the tire. Do not replace original equipment tires with load ratings less than the original tires. Doing so could lead to unintentional overloading of the tire, which could cause a failure resulting in loss of vehicle control and an ac- cident. Failure to comply may result in death, personal injury, equipment or property damage. Replacing a tire that is greenhouse gas certified. NOTE Drive Axles or Trailers: Replace tires on drive axles or trailers when less than 2/32 in.
of tread depth remains in any major groove. Check at three places equally spaced around the tire. See the next illustration for recommended measuring points for tread depth. The tires installed on this vehicle at the factory as original equipment are certified for Greenhouse Gas and Fuel Efficiency regulations. Re- placement tires must be of equal or lower rolling resistance level (TRRL or C rr ). Consult with your tire sup- plier(s) for appropriate replacement tires. NOTE To prolong your tires’ life and make them safer, have their radial and lat- eral run-out checked at your dealer. And of course, you should have your tires balanced anytime you change a tire.
5 Steer Tire Points (left), Drive Tire Points (right) 5-144 Y53-6077-1B1 (03/17)