DRIVING - Brakes Special Trailer ABS (Without PLC) Option Electronic Stability Control is a feature that reduces the risk of rollovers, jackknifing, and other loss of control situations. ESC features include Roll Stability Program (RSP) and Yaw Control. which might trigger the stability system. Always operate the vehicle safely, drive defensively, anticipate obstacles and pay attention to road, weather, and traffic conditions. ABS, ATC, and ESC stability systems are no substitute for prudent, careful driving.
If a trailer does not have PLC, but it does have ABS that is powered through an optional second trailer connector (ISO 3731) and that trailer ABS is designed to control the Trailer ABS Warning Lamp in the cab and the vehicle has been ordered with the option to turn on this lamp for these types of trailers, then this lamp will turn on when that trailer ABS has a system problem. This should be checked by a dealer as soon as possible. The Trailer ABS Warning Lamp will not turn on for the power-on test when connected to these types of trailers.
During operation, the ECU of the Bendix ® Advanced ABS system constantly compares performance models to the vehicle’s actual movement, using the wheel speed sensors of the ABS system, as well as lateral, yaw, and steering angle sensors. If the vehicle shows a tendency to leave an appropriate travel path, or if critical threshold values are approached, the system will intervene to assist the driver. Roll Stability Program 4 Bendix ® Roll Stability Program (RSP), an element of the overall ESC system, addresses rollover conditions. In the case of a potential roll event, the ECU will override the throttle and quickly apply brake pressure at all wheel ends to slow the vehicle combination.
The level of braking application during an RSP event will be proportional to roll risk. NOTE Very few trailers built before 03/01/2001 have this option. Trailers built after 03/01/2001 are built with PLC technology. A Real World Example of How the RSP System Operates Advanced ABS with Stability Control ESC may reduce the vehicle speed automatically. To minimize unexpected deceleration and reduce the risk of a collision the operator must: Excessive speed for road conditions creates forces that exceed the threshold at which a vehicle is likely to rollover on a higher-friction surface.
The system automatically reduces engine torque and applies the service brakes (based on the projected rollover risk) to reduce the What you need to know about your vehicle's braking, traction, and stability control features. Avoid aggressive driving maneuvers, such as sharp turns or abrupt lane changes at high speeds, Y53-6096-1A1 (01/17) 109