PACCAR 520 — Dual Range (Two-Speed) Rear Axle

DRIVING - Axle and Suspension switches may be available that can lock the interaxle driveline and/or any combination of the forward rear or rear-rear driving axles. The interaxle differential switch allows each axle to turn independently. In certain situations, engaging the interaxle differential lock relieves stress on the rear axles and reduces tire wear. Engaging this switch will also provide better traction in slippery or loose gravel conditions. switch has a guard to protect you from activating it accidentally. Always park your vehicle with the range selector in LOW. WARNING!

Do not put the differential lock in the LOCK position while the wheels are spinning freely (slipping), you could lose control of the vehi- cle or cause axle damage. Switch to LOCK only when the wheels are not spinning. Fail- ure to comply may result in death, personal injury, equipment or property damage. Important tips on operating a Dual Range Axle with Interaxle Differential: Shift the axle with the inter-axle differential in the unlocked position only. When you are driving with poor traction, lock the differential. When you have the differential locked, drive with the axle in LOW range only. When you are driving on a surface with good traction, keep the interaxle differential unlocked.

You can drive with the axle in the LOW or HIGH range. Always UNLOCK the inter-axle differential before shifting the axle speed range. In the LOCK position, continuous operation on paved, dry surfaces, put stress on the axles, and can possibly damage the internal gears. The switch has a guard to prevent accidental operation of the switch. 4 Dual Range (Two-Speed) Rear Axle Your vehicle may be equipped with a two- speed or dual range axle (option). You can select two rear axle ratios for operating under heavy loads or rough terrain as well as for over the road hauling.

Locking the differentials is typically used during ice or snow conditions and without tire chains, unpaved roads that have loose sand, mud or uneven surfaces. Look ahead and predict when the differential needs to be locked. Stop the vehicle and lock the differentials before approaching. While using the differential in the locked position, do not exceed 25 mph (40 km/h). When disengaging the differential lock, reduce the throttle to prevent drivetrain damage. The Low Range provides maximum torque for hauling heavy loads or traveling over rough terrain. The High Range is a faster ratio for highway speeds and general over the road conditions.

A switch on the accessory switch panel controls the Dual Range Rear Axle. You will notice that the Y53-6096-1A1 (01/17) 115