PACCAR 520 — What is an Auxiliary Axle

DRIVING - Axle and Suspension 3. To make the axle downshift, release and depress the accelerator quickly to increase the engine rpm. The axle will shift to LOW range. 4. You are now in the LOW axle range for rough terrain and heavy loads. Shift the transmission normally to maintain the desired speed. Operation of the auxiliary axles includes the proper maintenance of the system and calibration of its controls. Operating the auxiliary axles will also require a firm understanding of the Gross Axle Weight Rating (GAWR) and the load that is being carried. Contact an authorized dealership if you are unable to identify the axle creep rating of this vehicle.

Liftable/steerable (axle lift calibration required) Liftable/non-steerable (axle lift calibration required) Non-liftable (some suspensions require dump valve calibration) The vehicle will have switches on the dash to control the position of the auxiliary axles. In certain situations, however, the system will override the controls to protect the axle system. Replace with new text: For Self Steering Lift Axles, the axle will raise when the park brakes are applied or if the vehicle is placed in reverse. For Non-Steer Lift Axles, the axle will only automatically raise if the park brakes are applied and there are no park brakes on the lift axle.

Non-Steer Lift Axles do not automatically raise when the vehicle is placed in reverse. What is an Auxiliary Axle 4 Adjustable auxiliary axles (commonly known as Pusher or Tag axles) can add to the productivity of the vehicle by increasing the load capabilities of the vehicle when they are in the deployed (down) position. WARNING! Do not operate or park the vehicle with aux- iliary axles in the down/ loaded position when vehicle is unladen, or is being unload- ed. Raise or dump air into driver controlled auxiliary axle(s) prior to unloading vehicle. Failure to do so can result in loss of vehicle control or rollaway that may result in death, personal injury, equipment or property dam- age.

There are different configurations of axles with different functionality (liftable versus steerable). Without the extra axle, the excessive weight can reduce the service life of vehicle components such as, but not limited to, the frame rail, axles, suspension and brakes. Operating the auxiliary liftable axles must be performed in a manner that does not exceed the axle creep rating. Axle creep ratings are weight and speed limits that are allowed while the vehicle is fully loaded (in excess of the vehicle’s standard GAWR) and the axle is in its up position. Axle creep ratings are assigned by the axle manufacturer and are based on axle model and intended service of the vehicle.

See Also Vehicle Loading on page 24 Y53-6096-1A1 (01/17) 117