DRIVING - Driving Tips and Techniques higher gear to bring engine rpm within the optimum speed range. When driving downhill: shift to a lower gear, use the engine brake (if so equipped), and use the service brake, keeping the engine speed below 2,100 rpm. NOTE WARNING! Often these recommendations are secon- dary to maintaining an adequate and safe speed relative to the surrounding traffic and road conditions. Do not look at the Instrument Cluster Dis- play for prolonged periods while the vehicle is moving. Only glance at the monitor briefly while driving.
Failure to do so can result in the driver not being attentive to the vehicle’s road position or situation, which could lead to an accident and possible death, personal injury or equipment damage. Operate the engine within the optimum engine rpm range and do not allow the rpm's to exceed the maximum governed speed. See your Engine Operation and Maintenance manual for information regarding engine rpm. When the engine is used as a brake to control vehicle speed (e.g., while driving down a grade), do not allow the engine rpm to exceed maximum governed speed. Under normal load and road conditions operate the engine in the lower end of the range.
When the engine speed reaches its maximum governed speed, the injection pump governor cuts off fuel to the engine. However, the governor has no control over the engine rpm when it is being driven by the vehicle's transmission, for example, on steep downgrades. Apply service brakes or shift to a higher gear. Fuel economy and engine performance are also directly related to driving habits: 4 Fuel Consumption The vehicle's fuel consumption is connected to five important factors: maintenance, driving habits, general condition of the road, traffic conditions, and vehicle load. The best results in trip time and fuel economy are obtained while driving the vehicle at a steady speed.
Shift into higher or lower gears (or apply the service brake) to keep engine rpm near the lower end of the optimum operating range. Avoid rapid acceleration and braking. Proper maintenance will keep the vehicle running like new even after long periods of use. The driver must perform daily and weekly checks of the vehicle. The tachometer is an instrument that aids in obtaining the best performance of the engine and manual transmission, serving as a guide for shifting gears. Refer to the Engine Operation and Maintenance manual for optimum engine rpm. Maintenance factors affecting fuel consumption:
If the engine rpm moves beyond the maximum governed speed, indicating an overspeed condition, apply the service brake or shift to a air and/or fuel filters partially clogged engine valves out of adjustment injection pump improperly synchronized Y53-6096-1A1 (01/17) 125