MAINTENANCE - Maintenance Schedule 5 Y53-6096-1A1 (01/17) 135 System Component Task I A B C D E Front Suspension Front Spring Inspect for cracked leaves, worn bushings, and excessive corrosion. • Spring Pins and Shackles Inspect for worn parts and excessive joint clearance. Shim or replace as required. • Shock Absorbers Inspect for leaking, body damage, and damaged or worn bushings. Replace as required. Check the shock mounting stud torque. • Spring Pins Lubricate with approved grease. • Check for proper function. • U-bolts (ON HIGHWAY) Check the general condition and the tightness of the nuts.
Tighten the nuts to the specified torque value as required; see Suspension U-Bolts, Grade 8 on page 213. • • U-bolts (VOCATIONAL) Check the general condition and the tightness of the nuts. Tighten the U-bolts after the first day or two of operation. Then tighten the nuts to the specified torque value as required; see Suspension U-Bolts, Grade 8 on page 213. • • U-bolts (OFF HIGHWAY) Check the general condition and the tightness of the nuts. Tighten the U-bolts after the first day or two of operation. Then tighten the nuts to the specified torque value as required; see Suspension U-Bolts, Grade 8 on page 213. •