MAINTENANCE - Maintenance Schedule 5 146 Y53-6096-1A1 (01/17) System Component Task I A B C D E Steering Components Steering Linkage Check all joints for excessive lash: replace as required; see Steering System on page 204. • Draglink Tube Clamp and Ball Socket Check the torque: tighten to specified torque value as required. • • Pitman Arm Clamp Bolt and Nut Check the torque: tighten to specified torque value as required. • • Steering Intermediate Shaft Check the torque on the pinch bolt and nut. • • Steering Intermediate Shaft U-joints (ON HIGHWAY) Lubricate [EP NLGI #2 HD grease, +325°F to -10°F (+163°C to -23°C) range].
• • Steering Intermediate Shaft U-joints (OFF HIGHWAY or CITY DELIVERY) Lubricate [EP NLGI #2 HD grease, +325°F to -10°F (+163°C to -23°C) range]. • • Draglink and Tie Rod Arm Ball Sockets (ON HIGHWAY) Lubricate (EP NLGI #2 lithium-based, moly-filled, HD grease). • • Draglink and Tie Rod Arm Ball Sockets (OFF HIGHWAY or CITY DELIVERY) Lubricate (EP NLGI #2 lithium-based, moly-filled, HD grease). • • Fuel and Tanks Fuel Tanks Inspect tanks, brackets, hoses, and fittings for correct location, tightness, abrasion damage, and leaks: repair or replace as required. • Fuel Tank Breathers Check for proper function: clean the drain hoses. • Fuel Tank Straps Check the strap tightness:
tighten to proper torque value as required; aluminum tank - 30 lb-ft (41 Nm) cylindrical steel tank - 8 lb-ft (11 Nm) • • Fuel Tank Steps Check for snug fit of side plates against tank and tank straps. Check for damaged or broken steps, missing bolts, and missing grommet between tank and side plate. Replace missing or damaged parts and adjust for fit as required. •