MAINTENANCE - Transmission Maintenance Disc Wheels Wheel Cap Nut Torque Specifications on page 215 Frame Fastener Torque Requirements on page 214 WARNING! Improperly mounting and demounting tire and rim assemblies is dangerous. Failure to observe proper precautions could cause the tire rim assembly to burst explosively, caus- ing death or personal injury. See the wheel manufacturer's literature for the proper way to mount and demount your tires and rims. Follow their precautions exactly. WARNING! Use the correct components and tools when working on wheels. Grooves in the wheel disc or other damage to the disc can weak- en the wheel and cause it to eventually come off.
This could cause you to lose con- trol of your vehicle, and may result in an ac- cident. Failure to comply may result in death, personal injury, equipment or proper- ty damage. Transmission Maintenance General maintenance recommomendations for maintaining your vehicle's transmission. WARNING! See the transmission manufacturer's operator's manual for lubrication specifications and service intervals. 5 Always ensure the hood hold open latch is engaged to keep the hood fully open any time anyone gets under the hood for any reason. Failure to do so may cause the hood to close uncontrollably which may re- sult in death or personal injury. The end of the wheel wrench must be smooth.
Burrs on the end of the wrench can tear grooves in the disc. These grooves may lead to cracks in the disc, and can cause it to fail. CAUTION Wheel Bearings When adding oil, types and brands of oil should not be intermixed because of possi- ble incompatibility, which could decrease the effectiveness of the lubrication or cause component failure. For safe, reliable operation and adequate service life, your wheel bearings must be adjusted properly at the recommended intervals. Contact your authorized dealer to make sure the wheel bearings are properly adjusted. WARNING! Always support the vehicle with appropriate safety stands if it is necessary to work un- derneath the vehicle.
A jack is not adequate for this purpose. Failure to comply may re- sult in death, personal injury, equipment or property damage. See Also Lubrication Specification Chart on page 216 See Also Suspension U-Bolts, Grade 8 on page 213 Y53-6096-1A1 (01/17) 211