PACCAR 520 — Vehicle Identification Labels

INFORMATION - Vehicle Identification Labels Noise Emission Label Standards, for United States and U.S. Territories, be affixed to each motor vehicle and prescribe where such label may be located. This certification label, which indicates the date of manufacture and other pertinent information, is located on the driver’s side door edge or on the driver’s side door frame. WARNING! The Noise Emission Label is located in the driver's side door frame. It contains information regarding U.S. noise emission regulations, chassis number, and date of manufacture. Do not exceed the specified load rating.

Overloading can result in loss of vehicle control, either by causing component fail- ures or by affecting vehicle handling. Ex- ceeding load ratings can also shorten the service life of the vehicle. Failure to comply may result in death or personal injury. Paint Identification Label Component Identification The Paint Identification Label contains the paint colors used by the factory to paint your vehicle. It lists frame, wheels, cab interior and exterior colors. This label is located inside the glove box. Each of the major components on your vehicle has an identification label or tag. For easy reference, record component numbers such as, model, serial, and assembly number.

NOTE 6 GVW is the TOTAL SCALE WEIGHT the ve- hicle is designed to carry. This includes the weight of the empty vehicle, loading plat- form, occupants, fuel, and any load. Federal Safety Standard Certification Label The NHTSA regulations require a label certifying compliance with Federal Safety 226 Y53-6096-1A1 (01/17)