CONTROLS - Gauges in the Center Cluster Right Hand Standup Drive Station sequence. The total sequence should only take no more than 10 seconds to complete. Completing this sequence will indicate a successful Self Test. Have your instrumentation system checked by a qualified service technician if does not successfully complete. Right Hand (Curb) Side Instrument Cluster for Stand Up Applications Gauges in the Center Cluster 3 1 2 Standard Gauges 3 Audible Alarm 4 The audible alarm will sound during the Instrumentation System Self Test. The audible alarm will also sound in conjunction with most warning lights.
These events include but are not limited to headlight on, fifth wheel, stop engine, primary/secondary air, and driver door open warnings. Optional Icons 1. Information Display 2. Speedometer 3. Air Pressure 4. DEF Gauge Additional icons may be operational depending on individual vehicle specifications. These will be included in the Instrument System Self Test. 1. Tachometer 2. Information Display 3. Secondary Air Pressure 4. Fuel Level 5. Diesel Exhaust Fluid 6. Primary Air Pressure 7. Speedometer Instrument System Self Test NOTE When the ignition switch is turned on the instrumentation system will undergo a Self Test. This test will verify the operation of the gauges and warnings.
During the Instrumentation System Self Test, multiple warning icons will be displayed in a Some optional lights may illuminate even though your vehicle is not equipped with that particular feature. 54 Y53-6096-1A1 (01/17)