PACCAR 520 — Virtual Gauges

CONTROLS - Information Display done by navigating the menu via the Menu Control Switch. 4. Clock alarm sounds 5. Driver or passenger door is opened 6. Hazard warning lamp switch is on function is identified in the following descrip- tions. Information Display The various functions may be accessed by navigating through Menu Screens using the MCS. The bullets in the Menu Bar allow access to each item by pushing the MCS when the desired bullet is highlighted. Virtual Gauges 3 The Driver Information Display is located at the top of the instrument cluster. The virtual gauges function is selected through the rotary MCS knob and is available in both parked and driving modes. WARNING!

Rotating the MCS to this menu will allow you to view the most recent virtual gauge. Do not look at the Instrument Cluster Dis- play for prolonged periods while the vehicle is moving. Only glance at the monitor briefly while driving. Failure to do so can result in the driver not being attentive to the vehicle’s road position or situation, which could lead to an accident and possible death, personal injury or equipment damage. It displays important vehicle information through a constant monitoring of systems when any of the following conditions are met: In addition to a blank screen, the following are menu items and the information available within each menu selections.

While in this menu, press the MCS to scroll through all of the available virtual gauges on the truck. NOTE 1. Ignition key in ON or ACC positions 2. Ignition timer is active 3. Menu Control Switch (MCS) button is pushed (independent of ignition key switch position) Some Driver Information Display functions are only accessible when the vehicle is parked. Other functions are accessible while the vehicle is moving or when parked. Each Y53-6096-1A1 (01/17) 69