PACCAR 520 — Lights, Marker/Clearance/Trailer

CONTROLS - Dash Switches Lights, Hazard Turn switch for park/marker lights and headlights. When the Headlights are ON, the dash lights, side, and tail lights are also on. Headlights will turn on if the windshield wipers are turned on. Manually turning the headlights on and then off will override this function until the next time the vehicle is turned on. 3 Turn switch on to control Cab and Vehicle Marker/Clearance lights. This switch operates the emergency flashers. With the switch in the ON position, the emergency flasher makes all four turn signals (front and rear) flash simultaneously. The flasher works independently of the ignition switch.

You should always use the flasher if the vehicle is disabled or parked under emergency conditions. NOTE An interrupt switch for the trailer marker lights is mounted on the end of the turn sig- nal lever. CAUTION If you have confirmed there is a problem in the low beam wiring circuit, proceed with caution to the next available exit/turnoff and safely pull your vehicle completely off the road and call for assistance. Driving your vehicle with the headlamps on high beam (at reduced intensity) for a prolonged period could lead to an injury accident. Contact your nearest dealer to have the problem corrected as soon as possible. Lights, Marker/Clearance/Trailer WARNING!

Use your Hazard Warning Light System any time you have to stop off the road or on the side of the road, day or night. A hard-to-see vehicle can result in an injury accident. An- other vehicle could run into you if you do not set your flashers and follow the placement of emergency signals per FMCSR 392.22. Turn switch on to control Trailer Marker/ Clearance lights separately from the vehicle marker/clearance lights. Lights, Marker/Clearance Lights, Headlight 90 Y53-6096-1A1 (01/17)