MAN — Engine Brake

DD Platform EuroIV Operators Manual Table 2. Engine Brake The engine brake is enabled by a dash-mounted ON/OFF Switch with a separate intensity switch to select low, medium, or high braking power. CAUTION: LOSS OF VEHICLE CONTROL To avoid injury from loss of vehicle control, do not activate the Engine Brake system under the following conditions: On wet or slippery pavement, unless the vehicle is equipped with ABS (anti-lock braking system) and you have had prior experience driving under these conditions. When driving without a trailer (bobtailing) or pulling an empty trailer.

If the tractor drive wheels begin to lock or there is fishtail motion after the Engine Brake is activated, deactivate the brake system immediately if this occurs. The engine brake will only operate when the Accelerator Pedal is fully released. Disengaging the clutch will prevent the engine brake from operating. All information subject to change without notice.

45 DDC-SVC-MAN-0175 Copyright © 2014 DETROIT DIESEL CORPORATION DDDL 7.X System Requirements Minimum Hardware Recommended Hardware Windows XP, Windows Vista or Windows 7 (32 & 64 bit) Windows XP, Windows Vista or Windows 7 (32 & 64 bit) Intel® Core™ 2 Duo, AMD Athlon™ 64X2, or equivalent 1.8 Ghz processor 2.0+ GHz Dual-Core processor 1.0 GB RAM 2 GB RAM or more 40 Gigabyte Hard drive with 20 Gigabyte free 100 GB hard drive with 20 GB free space 32x CD ROM Drive DVD ROM drive Monitor and graphics card supporting 1024 x 768 resolution and 16-bit color Monitor and graphics card supporting 1280 x 1024 resolution and 32-bit color 1 free USB port Parallel port, three free USB ports Internet or Mainframe Connection to DDC Server (for updates) High Speed Internet – Broadband Internet Hardware Adapter device (One of the following) › Nexiq MagiKey device with parallel cable › Nexiq USB-Link with USB cable (Required for Cascadia diagnostics) Bluetooth functionality NOT approved at this time