DD Platform EuroIV Operators Manual How to Select Coolant This section covers selection of the required coolant for the engine. Coolant Definitions To help ensure complete understanding of the information, the definitions of the following terms are listed in the following Table. Table 5. Approved Coolants Required specifications for water and ethylene glycol inhibitor packages and inhibitor concentration are included in this section. NOTICE: To avoid engine damage from inadequate or over concentrated coolant, the required specifications must be adhered to before the coolant is replaced. The approved and preferred coolants for the engine are listed in the following table.
All information subject to change without notice. 93 DDC-SVC-MAN-0175 Copyright © 2014 DETROIT DIESEL CORPORATION Coolant Terms Term Definition Antifreeze Ethylene Glycol containing a corrosion inhibitor package and which meets an appropriate heavy-duty specification (i.e., TMC RP-329 Type A or ASTM Standard D6210 Type A for ethylene glycol). Coolant The fluid mixture circulating in the engine cooling system, typically a mixture of 50% water and 50% antifreeze. Drop–Out Precipitated sludge or deposit formation on cooling system components.
Fully Formulated Antifreeze Contains all the necessary inhibitors to protect a diesel engine, and does not, therefore, require a pre-charge of Supplemental Coolant Additive before its first use. Initial–Fill Coolant The coolant that is used in a new or rebuilt engine, or any time the cooling system is emptied and then refilled with coolant. OAT Organic Acid Technology. An inhibitor system based on organic acid inhibitors instead of traditional North American inhibitor formulations. SCA Supplemental Coolant Additive. Supplemental Coolant Additives are used in a preventive maintenance program to prevent corrosion, cavitation, and the formation of deposits.