Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

ESS00120 DISASSEMBLY 1. Remove: Fixed sheave 1 Stopper 2 Sliding sheave 3 Bushing 4 Spider 5 Removal steps: Immerse the primary sheave assembly in 80 100 C (176 212 F) water for several minutes. Attach the lower piece of the clutch spider sep- arator 6 onto a rigid table using suitable mounting bolts. Then, install the clutch separator adapter 7 onto the separator. Clutch spider separator: 90890-01711, YS-28890-B Clutch separator adapter: 90890-01740, YS-34480 Fit the primary sheave assembly onto the adapter and secure the supporting plates 8 . NOTE: Securely fit the projections on the adapter into the fixed sheave holes.

Set the clutch spider separator (bar wrench) 9 onto the spider and turn the special tool clockwise to loosen the spider. Clutch spider separator (bar wrench): 90890-01711, YS-28890-B CAUTION: The spider has a left-handed thread. Since a high torque is required to loosen the spider, make sure that the spider, fixed sheave and special tool are well secured. Loosen the spider carefully to prevent cracks and damage to the sheaves and spi- der. Remove the fixed sheave, fixed sheave stop- per, and sliding sheave from the spider. 4-4 PRIMARY SHEAVE AND DRIVE V-BELT POWR TR