Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

6. Inspect: Weight 1 Roller 2 Bushing 3 Slider 4 Rivet 5 Collar Wear/scratches/damage Replace. Slider inside clearance A 1 + A 2 : Min. 0 mm (0 in) Max. 0.3 mm (0.0118 in) Rivet replacement steps: Remove old rivet with the appropriate drill. Insert the rivet 1 from the ID mark 2 side. Press or peen the rivet head so that the diame- ter a of the rivet head measures 8.5 mm (0.33 in) or larger. 7. Measure: Bushing inside diameter Out of specification Replace the bushings as a set. A B Bushing inside diameter: A Roller New: 8.0 mm (0.31 in) Wear limit: 8.2 mm (0.32 in) B Weight New: 8.0 mm (0.31 in) Wear limit: 8.2 mm (0.32 in) NOTE:

When replacing the weight and roller bushings, use the YXR clutch bushing jig kit. C Removing D Installing 4-6 PRIMARY SHEAVE AND DRIVE V-BELT POWR TR YXR clutch bushing jig kit: YS-39752