Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

3. Eliminate: Carbon deposits (from the cylinders) Use the rounded scraper 1 . CAUTION: Do not use a sharp instrument. Avoid dam- aging or scratching the surface. 4. Eliminate: Carbon deposits (from the piston crown and ring grooves) 5. Inspect: Piston crown Burrs/nicks/damage Replace. 6. Eliminate: Score marks and lacquer deposits (from the piston wall) Use 600 800 grit wet sandpaper. NOTE: Sand in a crisscross pattern. Do not sand ex- cessively. 7. Measure: Piston-to-cylinder clearance Measurement steps: 1st step: Measure the cylinder bore (C) with a cylinder bore gauge 1 . NOTE: Measure the cylinder bore (C) parallel to and at right angles to the crankshaft.

Then find the av- erage of the measurements. 5-7 CYLINDER HEAD AND CYLINDER ENG