8. Measure: Side clearance (piston rings) Use the feeler gauge 1 . Out of specification Replace the piston and/or rings. Eliminate the carbon deposits from the piston ring grooves and rings before measuring the side clearance. NOTE: Side clearance (top): 0.02 0.06 mm (0.00079 0.0024 in) Side clearance (2nd): 0.02 0.06 mm (0.00079 0.0024 in) 9. Install: Piston ring (into the cylinder) Push in the ring with the piston crown. NOTE: Insert the ring into the cylinder, and push it approximately 20 mm (0.8 in) into the cylinder. Push in the ring with the piston crown so that the ring is at right angles to the cylinder bore. 10. Measure: End gap (piston rings) Use the feeler gauge 1 .
Out of specification Replace the rings as a set. End gap (top): 0.20 0.40 mm (0.008 0.016 in) End gap (2nd): 0.20 0.40 mm (0.008 0.016 in) a 20 mm (0.8 in) 5-9 CYLINDER HEAD AND CYLINDER ENG