ESS00175 INSPECTION 1. Inspect: Upper air shroud 1 Cracks/damage Replace. 2. Inspect: Cooling fan grill 1 Cooling fan housing 2 Cracks/damage Replace. 3. Inspect: Cooling fan belt 1 Wear/cracks/damage Replace. 4. Inspect: Cooling fan 1 Cracks/damage Replace. Bearings (cooling fan housing) 2 Pitting/damage Replace. Replacement steps: Remove the bearing(s) 2 using a general bearing puller. Install the new bearing(s). NOTE: Use a socket 3 that is the same size as the out- side diameter of the race of the bearing race. CAUTION: Do not strike the inner race 4 or ball bear- ings 5 . Contact only the outer race 6 . 5-25 ENGINE COOLING FAN ENG