ESS00178 REMOVAL 1. Remove: Starter handle 1 Ground lead 2 NOTE: To remove the starter handle, untie the knot 3 in the starter rope and then re-tie a knot 4 in the rope end so that it is not pulled into the recoil starter case 5 . ESS00179 INSPECTION 1. Inspect: Drive plate 1 Cracks/bends/damage Replace. Spring 2 (drive plate) Wear/damage Replace. Starter rope 3 Wear/breaks/damage Replace. Starter spring 4 Cracks/bends/damage Replace. Sheave drum 5 Cracks/damage Replace. Drive pawl 6 Return spring 7 Wear/cracks/damage Replace. 5-28 RECOIL STARTER ENG