TROUBLESHOOTING STARTER MOTOR DOES NOT OPERATE. WARNING Before starter motor operation, push the “ENGINE STOP” switch to “OFF”. A NO 1. Connect: Starter relay terminals (battery side and starter motor side) Check the battery and connectors. OK NO Replace and/or charge the battery. Jumper lead 2. Check: Starter motor operation 1 Repair and/or replace the starter motor. OK B WARNING 1. Disconnect: Starter relay connector 2. Connect: Starter relay connector terminals A wire for the jumper lead must have the equivalent capacity as that of the battery lead or more, otherwise it may cause the jumper lead to be burned.
This check is likely to produce sparks, so be sure that no flammable gas or fluid is in the vicinity. 1 NO Jumper lead 3. Check: Starter motor operation Replace the starter relay. 1 OK 7-19 ELECTRICAL STARTING SYSTEM ELEC