8-4 MAINTENANCE SPECIFICATIONS SPEC Model VK540E Crankshaft: Crank width “A” Crank width “B” Crankshaft deflection “C”: C 1 C , C 2 3 C 4 Measuring points: 1 2 Connecting rod big end side clearance “D” Connecting rod small end free play “F” 59.95 60.00 mm (2.360 2.362 in) 199.75 200.25 mm (7.86 7.88 in) Below 0.03 mm (0.0012 in) Below 0.04 mm (0.0016 in) Below 0.05 mm (0.0020 in) 97.0 mm (3.82 in) 93.0 mm (3.66 in) 0.25 0.75 mm (0.01 0.03 in) 0.8 1.0 mm (0.03 0.04 in) Big end bearing: Type Needle bearing Small end bearing: Type Needle bearing Crank pin: Crank pin outside diameter 23.987 24.000 mm (0.9444 0.9449 in) Connecting rod:
Small end diameter Big end diameter 24.995 25.008 mm (0.9841 0.9846 in) 31.010 31.023 mm (1.2209 1.2214 in) Reed valve: Material Thickness Stopper height Steel 0.19 0.21 mm (0.007 0.008 in) 9.4 10.0 mm (0.37 0.39 in) Carburetor: Type/quantity Manufacturer I.D. Mark Main jet (M.J) Pilot jet (P.J) Pilot air jet (P.A.J) Pilot outlet (P.O) Bypass 1 (B.P. 1) Bypass 2 (B.P. 2) Pilot screw (P.S) Throttle valve (Th.V) Valve seat size (V.S) Starter jet (G.S) Float height (F.H) Fuel level (from the bore center) (F.L) Engine idle speed B38-34/1 pcs.
MIKUNI 84R01 (for U.S.A./Canada) 86R01 (for Europe) #141.3 #90 ø0.8 ø1.2 ø0.7 ø0.8 1-1/4 turns out #130 ø1.5 ø1.4 12 16 mm (0.47 0.63 in) 49 51 mm (1.93 2.01 in) 1,200 ± 100 r/min