ESS00032 ENGINE ESS00033 SPARK PLUGS 1. Remove: Spark plug caps Spark plugs 2. Inspect: Electrodes 1 Damage/wear Replace the spark plug. Insulator color 2 3. Measure: Spark plug gap a Out of specification Regap. Use a wire thickness gauge. If necessary, clean the spark plugs with a spark plug cleaner. Standard spark plug: BR9ES (NGK) Before installing a spark plug, clean the gasket surface and spark plug surface. 4. Install: Spark plugs 2-3 SPARK PLUGS INSP ADJ Spark plug gap a : 0.7 0.8 mm (0.028 0.032 in) Spark plug: 20 Nm (2.0 mkg, 14 ftlb) NOTE: Finger-tighten a the spark plug before torquing b it to specification.