ESS00034 OIL PUMP ESS00035 Air bleeding 2-4 OIL PUMP INSP ADJ CAUTION: The oil pump and oil delivery line must be bled in the following cases: Any portion of the oil system has been dis- connected. The machine has been turned on its side. The oil tank has been run empty. As part of the pre-delivery service. 1. Fill: Oil tank 1 Recommended oil: YAMALUBE 2-cycle oil Oil tank capacity: 2.5 L (0.55 Imp gal, 0.64 US gal) 2. Remove: Drive V-belt guard Carburetors Refer to “CARBURETORS” in CHAPTER 6. 3. Place a rag under the oil pump assembly to soak up any spilled oil. 4. Disconnect: Oil hose 1 5. Drain the oil until no more air bubbles appear in the oil hose 1 . 6. Connect: Oil hose 1 7.
Disconnect: Oil delivery hoses 1 8. Feed the “YAMALUBE 2-cycle oil” into the oil delivery hose using an oil can 2 for com- plete air bleeding. 9. Connect: Oil delivery hoses 1