ESS00075 Toe-out adjustment 1. Place the machine on a level surface. 2. Check: Ski toe-out Point the skis forward. Out of specification Adjust. Ski toe-out ( a c ): 0 15 mm (0 0.59 in) Ski stance b (center to center): 960 mm (37.8 in) A 3. Adjust: Ski toe-out Adjustment steps: Loosen the locknuts (tie-rod) 1 . Turn the tie-rod 2 in or out until the specified toe-out is obtained. Tighten the locknuts (tie-rod) 1 . Locknut (rod end): 25 Nm (2.5 m kg, 18 ft lb) LOCTITE B CAUTION: After tightening the inside and outside ball joint locknut 1 , make sure the tie-rod 2 can be rotated freely through the ball joint travel.
If not, loosen the locknut 1 and re-position the ball joint so that the tie-rod 2 can be ro- tated freely. Tighten the locknut to specifica- tion. A Left side B Right side 2-24 STEERING SYSTEM INSP ADJ