. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS REMARK Regardless of the ambient temperature, it is possible to start the position preheating after starting is as shown in the table. Above 10 ° C (50 ° F) 0 10 to -30 ° C (50 to -22 ° F) Change 0 to 20 below -30 ° C (22 ° F) 20 3 - 130 engine preheating manually 1. Turn the key in starting s (A). The preheating mo starts. (Preheating continues wh at the left position.) The preheating monitor 2. preheating starts and the n goes off in about 10 secon 3. After the preheating mon itor goes off, turn the key in switch (3) to START posi tion (C).
The engine will star If t he engine cannot be star ted with the above procedure , wait at least two minutes, then s Turbo protect function The turbo protect function is a function to protect the turbocharger by kee ping the engine speed at less than 1000 rpm immediately after the e ngine is started. unction is actuated, the engine speed is held at less than 1000 rpm, regardless of the l dial. When the turbo protect f unction is actuated, the engin e speed is held a position of the fuel contro When the turbo protect fu nction is actuated, the engine spee d is held at le ss than 1000 rpm, even i f the fuel control dial is operated.
When the turbo protect fu nction is canceled, the engine spee d is set to th e speed for the position o f the fuel control dial. The relationship betwee turbo protect function and the temperature of the engin