. OPERATION MACHINE OPERATIONS AND CONTROLS Engine Warm Up 3 - 132 NOTICE Do not acc elerate the engine suddenl y until the warm-up opera tion has been com Do not run pleted. the engine at low idling or high idling under no load for more than 20 mi and will al nutes. This will have an a so have an adverse effect dverse effect on the envir on the internal structu onment, re of the engine. If it is necessary to run the engine at idling for more than 20 minutes, a pply a load from time to tim e or run at a mid-range After the en gine starts, do not start o perating the machine i mmediately. First, carry out the following op erations and checks. 1. This ma below 3 automat speed.
If the en 10 minu speed. chine is equipped with an automatic engine warm-up system, so if the engine water temperature is 1. 1. warm-up below 3 0 °C after the engine is started, the engine wa rm-up operation starts automatically. Whe n the engine automat ic warm-up operation sta rts, the engine speed i s maintained at a speed higher than the nor mal low idling speed. If the en gine water temperature goes above 30 °C or if t he warm-up operation h as been continued f or more than 10 minu tes, the automatic warm -up operation is cance lled and the engine spe ed drops to the nor mal low idling speed. 2. Check t hat engine coolant tem ect temperature.
lays low temperature, u perature monitor (1) displays se the procedure in Step 3 to displays the corr If it disp carry ou t additional warm up o f the engine until the monitor e. correct: Monitor background (C) is blue monitor low: Monitor background (C) is white 3. Turn fue l control dial (2) to a poi nt midway between lo w idling (MIN) a nd full speed (MAX), run the engine under no l oad at a mid-ran ge speed until engine co olant temperature mo nitor (1) displays the correct temperatur e.