. OPERATION TRANSPORTATION Loading bending. travel speed monitor (6). 3 - 172 1. Load and unload on Maintain a safe dist ance from the edge of a 2. Apply the trailer bra kes securely, then put bl ocks (1) und er the tires to prevent the trailer from moving. ht ramps (2) parallel to Set left and rig equally spaced t o the left and right of cent er (3) of the t railer. Make angle of i nstallation (4) a maxim um of 15°. If the f the ramps bend a large amount under t he weight o machine, put blo cks under the ramps to prevent them from 3. Turn the travel spe ed selector switch to low speed travel (Lo ed selector switch (5) to switch the travel lamp lights up). Press travel spe speed.
The trav travel 4. Turn auto-decelera tion switch (7) OFF an d operate the fuel control dial to set th Each time auto switches OFF J When auto-dece auto-deceleration control dial to set th Each time auto e engine speed to low id -deceleration switch ( ON J OFF in turn. leration switch (7) is monitor (8) goes out. ling. 7) is pressed, it turned OFF, the switches OFF J When auto-dece auto-deceleration 5. Turn the swing lock switch ON to apply the swing lock. When the swing l ock switch is turned to th e ON positio n, the swing lock monit (a): ON position (b): OFF position or (9) lights up.