Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION Unloading bending. selector switch to low speed travel (Lo Press travel speed selector switch (5) to switch the travel speed. The travel speed (Lo, Mi, Hi) is displayed on the travel speed monitor (6). 3 - 178 1. Load and unload on firm level ground only. Mai ntain a safe distance from the edge of 2. Apply the trailer br akes securely, then put block s (1) under the tires to prevent th e trailer from moving. ght ramps (2) parallel to ea Set left and ri to the left and right of center (3 ) of the trailer. installation (4) a maximum of 15°. If the weight of the large amount under the locks under the ramps to prev ent them from 3.

Remove the chain s and wire ropes fastening th 4. Start the engine. up fully. to FREE position (F). Warm the engine 5. Set the lock lever 6. lamp lights up). 7. Turn auto-deceler ation switch (7) OFF and op erate the fuel control dial to set Each time au switches OFF When auto-de auto-decelerati control dial to set Each time au the engine speed to low idling to-deceleration switch (7) i J ON J OFF in turn. celeration switch (7) is turn on monitor (8) goes out. . s pressed, it ed OFF, the