. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE Loosening Track Tension WARNING 4 - 31 4. Continue to pump in grea se until dimensi on (S) be comes zero (0) . If the tension is sti ll loose , the p in and b ushing are excessively worn, so the y must be eithe r turned or replaced. Please cont act your Kom atsu distributor for repair It is extremely dan gerous to relea se the g rease by any meth od excep t the If track tension is not relieved by this procedure, c ontact you r Komatsu 1. Loosen plug (1) gradually to release the grease. e turn. 2. When loose ning plug (1), turn it a maxim um of on 3.
If t he greas e does not co me out smoothl y, move t he machine forwards an d backwards a short distanc 4. Tighten plug 5. To check if idle, move the m achine slowly forwar d (by an amount equal to the length of tra ck on ground ), then s top the machine. 6. Check the tr ack tension a gain, an d if the tension is not correct, adjust it aga in.