Komatsu — LUBRICATING

. MAINTENANCE MAINTENANCE PROCEDURE EVERY 100 HOURS MAINTENANCE LUBRICATING 4 - 47 NOTICE I f any a bnormal noise is g enerated from any gr easing poin t, carr y out g reasing regardless of the gr Carry o ut greasing every 10 hours for the first 5 0 hours on a new machine. After th e machine was su bjected to jobs in the water, be su re to grease the 1. Set th e machine to th e greasing p osture shown o n the right, lower the work equipm ent to the ground, then stop t he engine. 2. Using a grease pum p, pump in grease through the grease ws. ff any old grease that was pushed out. rease fitting s shown by arro 3.

After greasing, wipe o ff any old grease th at was pu shed (1) Boom cylinder foot pin (2) Boom foot pin (2 place s) (3) Boom cylinder rod end pin (2 places (4) Arm c ylinder foot pin ( 1 place) (5) Boom - Arm coupling (6) Arm c ylinder rod end ( (7) Bucke t cylinder foot pi