. MAINTENANCE MAINTENANCE PROCEDURE CHECK WATER PUMP CHECK VIBRATION DAMPER 4 - 79 EVERY 4000 HOURS MAINTEN ANCE Carry out th e periodic maintenance wo rk of every 10 0,250, 500 , 1000 and 2000 hours of opera tion at the same time. Check for l eakage of water and oil aro und the wate r pump . If any problem is f ound, please as k your Kom atsu distribu tor to c arry out disassembl y, repair, For the ch eck and re quired. C special tools are re ontact Komatsu Ltd. or its di stributo r in the territory for the replacement . It has to be replaced w ith a n ew one in the follow ing cases .
otched both on the damper hub and on the Mating mar k (1) is n otched on the inertia mem ber of the vibration dampe r to show any misalignment between th e two. lignment exceeds 1.6 mm (0.063 in), or if there is any If this misa xceed any dent found on the damper m etal surfa ce deeper tha n 3.2 m m (0.1 in), then (2) the vibration damper mus t be replaced CHECK STARTING MOTOR Contact yo ur Komats u distributor to h ave the starti ng moto r checked. If the engin e is starte d frequently, hav e this inspect ion carried out every