. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Replace Additional Breaker Pilot Filter Element WARNING Immediately after the engine is stopped, the parts or oil are at high temperature and may cause burns. Wait for the temperature to go down before starting the operation. If compressed air is used, there is danger of dirt flying and causing personal injury. Always wear safety glasses, dust mask, and other protective equipment. NOTICE 6 - 13 For details of the replacemen t interval for the element, "MAINTENANCE INTERVAL FOR HYDRAULIC Prepare a co ntainer to c atch the 1. Lower the work equipment to t he ground and stop t he engine. 2.
Turn the sta rting switch to the O N position (B), then set the lock lever to the FREE position (F). 3. After carryi ng out Step 2, opera te each wo rk equipmen t control lever and a ttachment control p edal fully t o th e fron t, rear, left, and right 2 or 3 times w ithin 15 seconds t o release t he internal pressure in the hydraulic circui