. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT 6 - 20 1. Press worki ng mode selector switch ( 1) or press switch es F3 ct breaker mode B. r mode B highlighted in accept the selection. rking mode selector switch If switch mode se mode. If a slide mode is lead to suddenly If breake the break carry out F5 is pressed, the screen returns to the working lection screen without changing to the breaker arm or other special attachment is installed and the switched to the breaker mode by mistake, it may serious danger, such as the work equipment dropping.
r operations are carried out in a mode other than er mode, the warning screen is displayed. Always breaker operations in the breaker mode. en using e stop valve is at the FREE position. e working mode is B mode. the path of the oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". ering whether it is necessary to install an accumulator for the attachment circuit, contact the anufacturer and then decide. er mode, the warning scre en is displayed.
Al ways breaker operations in the Precautions wh Check that th e stop valve is at the FRE Check that th e working mode is B mod For details of the path of the oil, see "H YDRAULIC CIRC UIT (PAGE When consid ering whether it is neces attachment m anufacturer and then dec For other pre cautions when handling th e breaker, follow t he instruction manual from t he breaker manufacturer and use the breaker correctly. The deteriora tion of the hydraulic oil wh en using the break er is much f aster than for nor mal operations, so reduce the maintena nce interval for the hydrau lic oil and elemen For details, s ee "MAINTENANCE INTE RVAL FOR HYDRAULIC BREAKER (PAGE 3.
If the breake r mode is selected, "Reall y Set Breaker Mod e?" is press When Using General Attachment Such as Crusher With the working mode set to ATT mode, insert the lock pin in front-and-rear FREE position (c). Press the front or rear of the pedal to operate the attachment. pin in With the workin g mode set to ATT mod front-and-rear F REE position (c). Press the attachment. pedal to operate