. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT may cause other SPECIFICATIONS 6 - 22 LONG TERM STORAGE If t he equipment i s not t o be used for a long time, do as f ollows. Set the stop va lve in t he L OCK condition. Install the plug to the valv Set the lock pin at the LOC K position. If there i neral attachme problems operating the peda overheating and Hydraulic specifications Max. fl ow at m erge: 2 14 x 2 lite min Safety valve re lief set pressure for service valve: 27.4 MPa (280 kgf/cm 3980 PSI)(except B mode) Safety valve cr acking pressure for service valve: 24.5 MPa (250 kgf/cm 550 PSI)(except B mode) Safety valve re lief set pressure for service valve:
20.6 MPa (210 kgf/cm 2980 PSI)(B mode) Safety valve cr acking pressure for service valve: 15.2 MPa (155 kgf/cm 200 PSI)(B mode) In additio n, valve s with a saf ety v alve relief set pressur e of 24.5 MPa (250 kgf/cm 2 , 3550 P SI elief valve cracking pressure of 20. 1 MP a (20 5 kgf/cm 2911 PSI) ar e also avilable so p lease c ontact your Komatsu distributor.