. OPERATION DETAILED CONTROLS AND GAUGES should be in the green range. If the indicator enters the red range (A) during operations, the hydraulic oil temperature is 102 ° C (215.6 ° F) or more. Run the wait for the hydraulic oil Display (G) at low temperatures: Monitor background (K) is white Display (H) at correct temperatures: Monitor background (K) is blue Display (J) when condition is abnormal: Monitor background (K) is red should be in the green 3 - 23 Hydraulic Oil Temperature Gauge This m eter (11) shows the hydraulic oil t During engine at temperatur (A) - (B) low idling or stop it and w e to go down. : Red range : Green range :
White range (A) - (D) (D) - (C) REMAR When the i ndicator reaches red range (A ), the hydraulic oil temperature Red range (A) position: 102°C (215.6°F) Red range (B) position: 105°C (221°F) o When the i ndicator is in red range (A) - ( B), hydraulic oil temperature monitor (E) shows the a When the engine is started, if the indic ator is at position (C) and the hydraulic oil tempera ows the low-temperature display. If this happens, c quipment Warm Up (PAGE 3-134)". hydraulic oil tempera ture is 20°C (68°F), hydraulic o il temperature monitor (E) sh arry out the warm-up operation.
For details, see "Hydraulic E Fuel Gauge This m eter (12) shows the amount of fuel During normal operations, the indicato ndicator starts to enter red range ( range. If the i is less than inspection (A) - (B) 60 liters (15.85 US gal) of fu and add fuel. : Indicates red range : Indicates green range (A) - (C) REMAR K When the i ndicator reaches red range (B ), there is less than 41 liters (10.83 US gal) of fuel re When the i ndicator is in red range (B), fu el level monitor (D) lights up red. The co rrect fuel level may not be display ed for a short time when the starting switch is turned ON, but this is not an abnormalit y.