Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES Travel Speed Selector Switch WARNING Mi J Hi J Lo in turn. (high-speed) or Mi (mid-range speed). 3 - 31 When loading or unload ing from a trailer, always travel at low speed (with travel speed selector switch (3) at the Lo position). Never operate travel sp eed selector switch (3) while loading or unloading. I f the travel speed is sw itched between Hi and Lo when the machine is traveling, the machine may de viate to one side, even when traveling in a stra Stop the machine befor Switch (3) is used to se t the travel speed to 3 stages. d travel peed travel ravel ted, the speed is automatically set to Lo.

ch is pressed, the display changes Lo J Lo Mi speed (Mi), when trave power is needed, the ling on soft ground or uphill, a nd travel system automatically shifts dow n to low speed travel (Lo). Ther e is no need to operate the switc h. In this case, the pilot monitor o n the monitor display stays lighte d up at Hi REMARK Each time travel speed selector switch (3) is switched, the mode is displayed on the moni screen returns to the st tor display, and after two seconds, the andard screen.