ATTACHMENTS, OPTIONS Method of using 2 levers Method of using 2 levers 0. Explanation of components 0. Lift arm control lever 0. This lever (1) is used to operate the lift arm. NOTICE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see “Leveling oper- ations on page 3-78“. Position (a): RAISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Position (b): HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d):
FLOAT The lift arm moves freely under external force. Raise AE41484B-A Lower 6-3 (1) Lift arm control lever (3) Directional selector switch (2) Bucket control lever (4) Directional selector actuation switch