Explanation of components OPERATION Machine monitor Parking brake reminder caution lamp 0. This lamp (2) lights up when engine is stopped but the parking brake is not applied. At the same time, the central warning lamp lights up and the alarm buzzer sounds intermittently. When the parking brake is applied, the lamp goes out and the buzzer stops. HST oil temperature caution lamp 0. This lamp (3) lights up to warn the operator that the HST oil temperature has risen. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up.
During operation (engine running) When the HST oil temperature goes up, the HST oil tempera- ture caution lamp and central warning lamp light up, and the alarm buzzer sounds intermittently. At the same time, “E02“ and “HST OVERHEAT“ are displayed on the character display in turn, so stop the machine and run the engine at a midrange speed under no load until the lamp goes out. Engine cooling water temperature caution lamp 0. This lamp (4) lights up to warn the operator that the engine cooling water temperature has risen. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up.
During operation (engine running) If the engine cooling water temperature rises, the engine cool- ing water temperature caution lamp only will light up. If the water temperature rises further, the central warning lamp will light up and the alarm buzzer will sound intermittently. At the same time, “E02“ and “ENGINE OVERHEAT“ are dis- played on the character display in turn, so stop the machine and run the engine at a midrange speed under no load until the lamp goes out. 3-16