Explanation of components OPERATION Machine monitor Reset method for filter, oil replacement time 0. The filter and oil replacement time is displayed on the character display, so if the filter and oil have been replaced, reset the filter and oil change time. 1. Press the ( ) of monitor panel mode selector switch 1, and display the odometer. 2. Press (>) or ( display “MAINTENANCE MONITOR“. 3. Press the ( ) of monitor mode selector switch 1. The item is displayed, and then the replacement interval is displayed in the center and the number of times of replace- ment is displayed on the right in turn for 3 seconds each. 4.
Press the (>) or ( to display the item (filter or oil) which has reached the replacement time. 5. Press the ( ) of monitor mode selector switch 1. [RESET] and [YES NO] are displayed in turn. 6. When resetting the replacement time, press (>) or ( monitor panel mode selector switch 2, align the cursor with “YES“, then press ( ) of machine monitor mode selector switch 1. It will reset and return to the previous screen. To abort, align the cursor with “NO“, then press ( ) of moni- tor panel mode selector switch 1. 7. When resetting the replacement time for another item, carry out the procedure from Step 4.
After completing, press ( ) of monitor panel mode selector switch 1 twice or turn the starting switch OFF. 3-26