OPERATION Explanation of components Switches Room lamp switch 0. The switch (17) is used to turn the room lamp ON and OFF. Position (a): OFF Position (b): Lights up when the cab door opens Position (c): Lights up REMARK The room lamp lights up even when the main switch is OFF, so when leaving the operator’s compartment, turn the switch to position (a) (OFF) or (b). When operating with the cab door fully open, set the switch to position (a) (OFF). Rear heated wire glass switch 0. When this switch (18) is pressed, electric current flows through the heated wire glass at the rear and the mist is removed from the glass. Position (a): ON (removes mist from glass) Position (b):
OFF Switch for traction control 0. The traction control is switched on by means of this switch (19). When the traction control is on, the drive force that is trans- ferred to the wheels is reduced in the 2nd to 4th gears. Position (ON): ON Position (OFF): OFF Drive force Reduction Travelling speed 3-35